A dirt bike snowmobile conversion kit swaps your bike’s front wheel for a ski and its rear wheel and swingarm for a short snowmobile-style track, turning a dirt bike into a snow bike. Timbersled, owned by Polaris, is the best-known brand, and a new kit costs thousands of dollars: one Utah dealer listed the 2025 Timbersled ARO 129 Sport from $5,499 before installation. Used kits are common and cheaper, but fit and condition matter a lot.
This guide explains how these kits work, what they cost, which bikes suit them, and what to check before you buy one secondhand.
Key Takeaways
- Kits are bike-specific. You need the right mounting kit for your exact make, model and year.
- New Timbersled kits start in the mid-$5,000 range at dealers, before labor, and premium versions cost more.
- A 450cc four-stroke is the most common base bike, since snow takes a lot of power.
- Used kits can save money, but check the track, rails, ski and brake system closely.
- Check your state’s snowmobile registration and trail rules before you ride on public land.
How a Dirt Bike Snow Conversion Kit Works
According to Timbersled’s own explainer, the system converts a bike from dirt to snow by replacing the tires with a ski and a track. In practice, the rear assembly bolts in where the swingarm and rear wheel sit, and the bike’s chain drives the track. The front wheel comes off and a ski attaches to the fork.
The result rides very differently from a snowmobile. You still balance like you would on a motorcycle, so a snow bike can carve tight lines through trees and side-hill where a wide sled struggles. That narrow footprint is the main reason people choose one.
Main parts in a kit
- Track and rear suspension: the heart of the kit. Timbersled’s 129-inch models use an 11.5-inch-wide track, according to the dealer spec sheet.
- Front ski: mounts to your existing fork in place of the wheel.
- Brake system: a dedicated rear brake for the track.
- Bike-specific install kit: brackets and parts that match your exact bike. This is sold separately in many cases.
What Does a Snow Bike Kit Cost?
Prices vary by model, year and dealer, so treat these as rough guides as of November 2026. A dealer listing for the 2025 Timbersled ARO 129 Sport, described as the entry point into the ARO line, shows a starting price of $5,499. That listing gives a dry weight of 112 lb for the rear assembly and 16 lb for the front ski.
Budget for more than the kit itself. You’ll likely pay for the bike-specific install kit, setup and labor if you don’t install it yourself, plus cold-weather extras like hand guards and heated grips. Say you already own a suitable 450: your total for a new setup can easily land well above the kit’s starting price once installation and accessories are added.
Buying a used kit
Used kits show up on local marketplaces and powersports forums every fall. They can be a smart buy, but inspect these points before paying:
- Track condition: look for torn or missing lugs, cracks and exposed cords.
- Rails and slides: heavy wear on the plastic slides means replacement soon.
- Ski and carbide runner: bent skis or worn runners hurt steering.
- Brake and shocks: leaks or spongy brakes need attention.
- Install kit match: confirm it fits your bike, or price the correct mounting kit separately.
Which Dirt Bikes Work Best for Snow Conversion?
Pushing a track through deep snow takes much more power than spinning a tire on dirt. That’s why most riders use a 450cc four-stroke or a strong two-stroke. Smaller bikes can work on groomed trails or packed snow, and Timbersled does offer a youth-sized RIPPER system for 110cc bikes.
If you’re still choosing a base bike, our guide to the KTM 450 XCF covers a popular off-road 450, and our 125cc dirt bike buying guide explains the two-stroke versus four-stroke trade-off. Fuel injection helps a lot, because it adjusts for altitude and cold without carburetor tuning.
Installing a Snow Bike Kit
Timbersled publishes an installation walkthrough, and many owners do the job themselves with basic tools. Still, it isn’t a quick wheel swap the first time. You’ll remove the rear wheel, swingarm and front wheel, then fit the install kit, track assembly, ski and brake. Most riders also switch to a shorter gear ratio and add hand guards.
If you aren’t comfortable bleeding brakes or setting chain tension, have a dealer do it. A bad install can cause chain or brake failure far from the trailhead, which is a serious problem in cold weather.
Snow Bike vs Snowmobile: Which Suits You?
| Factor | Snow bike conversion | Snowmobile |
|---|---|---|
| Upfront cost if you own a bike | Lower (kit only) | Higher (whole machine) |
| Tight trees and steep side-hills | Very good | Harder on wide sleds |
| Comfort on long trail days | Less comfortable | More comfortable |
| Carrying a passenger or gear | Limited | Easier |
| Year-round use of one machine | Yes, convert back for summer | No |
The table points to one clear pattern. A conversion makes most sense if you already ride dirt bikes and want technical backcountry riding. If you want relaxed trail cruising with a passenger, a snowmobile is usually the better tool.
Is a Dirt Bike Snowmobile Conversion Kit Worth It?
For riders who already own a strong dirt bike and live near deep snow, a dirt bike snowmobile conversion kit is one of the cheapest ways into technical winter riding. Buy a kit that matches your exact bike, budget for installation and cold-weather gear, and inspect any used kit carefully. If you mostly want groomed trails, rent a snowmobile first and compare before you spend.
Frequently Asked Questions
Can any dirt bike be converted to a snow bike?
Most full-size off-road dirt bikes can be converted, but you need a kit and install parts made for your specific bike. Very small or low-powered bikes struggle in deep snow. Check the kit maker’s fitment list for your make, model and year before buying anything.
Do you need to register a snow bike?
Often yes, but rules vary by state. Many places treat snow bikes like snowmobiles for registration and trail permits when you ride on public land. Check with your state’s parks or natural resources department before riding, since fines for unregistered machines can be steep.
How long does it take to install a Timbersled kit?
Plan on several hours for a first installation, and less once you’ve done it before. The job involves removing the swingarm and wheels, fitting the install kit, and setting up the brake and chain. Dealers can install it if you’d rather not.
Can you convert a snow bike back to a dirt bike?
Yes. The kit is designed to come off, so you can reinstall the wheels and swingarm for summer riding. Many riders keep the bike-specific install brackets in place or store them with the kit to make the seasonal swap faster.
Headlinza writes practical guides on motorcycles, vehicles and outdoor gear.

